AZ-305 ยท Hybrid networking and network security
Optimizing network performance
Accelerated networking, proximity placement groups, choosing regions near users, ExpressRoute FastPath, CDN/Front Door edge for latency.
Key points
- Accelerated Networking: SR-IOV bypasses the host virtual switch; lower latency and jitter, more packets per second, less CPU.
- Enable only on a stopped (deallocated) VM.
- Proximity placement groups: VMs physically close.
- Regions near users plus Front Door or a CDN.
- ExpressRoute FastPath: skips the gateway; needs Ultra Performance, ErGw3AZ or ErGwScale (10+ units).
- Direct spoke peering avoids a firewall hop.
Source: https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
Practice questions
How does Accelerated Networking reduce latency for a VM?
- It routes traffic over the Microsoft backbone instead of the internet
- It uses SR-IOV so traffic bypasses the host virtual switch
- It attaches a second NIC and load-balances across both
- It compresses packets before they leave the VM
Show answer
Answer: B. It uses SR-IOV so traffic bypasses the host virtual switch
Accelerated Networking enables SR-IOV, so packets go from the NIC straight to the VM and bypass the host and its virtual switch, while policies are enforced in hardware. It does not change routing, add a second NIC or compress data.
Which are documented benefits of Accelerated Networking?
- Lower latency and more packets per second
- Much lower latency to on-premises sites
- Reduced jitter
- Can be turned on while the VM keeps running
- Lower CPU use for network processing
Show answer
Answer: A. Lower latency and more packets per second, C. Reduced jitter, E. Lower CPU use for network processing
Removing the virtual switch from the data path lowers latency and raises packets per second, reduces jitter and lowers host CPU use for networking. The benefit to cross-VNet or on-premises latency is minimal, and it cannot be enabled on a running VM.
You can turn on Accelerated Networking for a running VM without stopping it.
Show answer
Answer: False
False. Accelerated Networking can be enabled on a supported VM only when the VM is stopped and deallocated, so plan a maintenance window for existing VMs.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
