100-150 CCST ยท Network models, types and protocols
Frames, packets and encapsulation
Data, segment, packet, frame and bit as PDUs, encapsulation and de-encapsulation, and the types of addressing used at each layer (MAC, IP, port).
Key points
- Each layer wraps the data from the layer above with its own header.
- Application data becomes a segment (Transport, adds ports), then a packet (Network, adds IP addresses), then a frame (Data Link, adds MAC addresses), then bits on the wire.
- The receiver reverses this: de-encapsulation.
- Ports pick the application, IP addresses pick the host across networks, MAC addresses pick the next device on the local link.
Practice questions
What is the PDU name at the OSI Data Link layer?
- Segment
- Packet
- Frame
- Bit
Show answer
Answer: C. Frame
The Data Link PDU is a frame. Segment belongs to Transport, packet to Network, and bits to Physical.
Which values are found in the TCP header added at the Transport layer?
- Source port
- Destination IP address
- Destination port
- Source MAC address
- Sequence number
Show answer
Answer: A. Source port, C. Destination port, E. Sequence number
A TCP header carries source and destination ports and a sequence number. IP and MAC addresses are in the Network and Data Link headers.
The source and destination IP addresses of a packet are rewritten by every router it crosses (no NAT involved).
Show answer
Answer: False
False. Routers rewrite the frame (MAC addresses) at each hop, but the IP addresses stay the same from sender to receiver unless NAT is used.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
