N10-009 ยท Network attacks and defenses
DoS, rogue devices and on-path attacks
DoS/DDoS, rogue DHCP servers and APs, evil twin, on-path attacks.
Key points
- DoS exhausts a target's capacity; DDoS uses many distributed sources (often a botnet), sometimes reflection/amplification.
- Rogue DHCP: bad gateway/DNS. Rogue AP: unauthorized AP.
- Evil twin: copies a legitimate SSID to lure clients.
- On-path: sits between two parties to read or alter traffic (ARP poisoning, rogue AP, DNS spoofing).
- Defenses: rate limiting, DDoS scrubbing, DHCP snooping, WIPS, encryption, certificate validation.
Practice questions
What makes a DDoS attack different from a plain DoS attack?
- It uses encrypted traffic
- It uses only UDP packets
- It targets only DNS servers
- It comes from many distributed sources
Show answer
Answer: D. It comes from many distributed sources
DDoS traffic comes from many distributed hosts, usually a botnet, so blocking one source does not stop it. Encryption and protocol choice are not what defines the term.
Which measures help contain a rogue DHCP server?
- Enable DHCP snooping on the access VLANs
- Mark every access port as trusted
- Trust only the port toward the legitimate DHCP server
- Lengthen the DHCP lease time
- Disable ARP on client devices
Show answer
Answer: A. Enable DHCP snooping on the access VLANs, C. Trust only the port toward the legitimate DHCP server
DHCP snooping drops server offers arriving on untrusted ports, and only the port toward the real server should be trusted. Trusting all access ports or lengthening leases leaves the rogue working.
True or false: an on-path attacker must be physically connected to the cable between the victim and the server.
Show answer
Answer: False
On-path position can be gained logically, for example through ARP poisoning, a rogue AP, or DNS spoofing, with no tap on the cable.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
