N10-009 ยท OSI model and network devices
NAS, SAN, VPN, QoS and TTL
Network storage types (NAS vs SAN), purpose of VPN, QoS traffic prioritization and the TTL field.
Key points
- NAS: file-level storage shared over the network (SMB, NFS).
- SAN: dedicated network giving servers block-level storage (Fibre Channel or iSCSI).
- VPN: encrypted tunnel across an untrusted network.
- QoS: prioritizes traffic such as voice, often by DSCP marking.
- TTL: IP header field that routers decrement at each hop; a packet is discarded at zero, which stops routing loops.
Source: https://www.rfc-editor.org/rfc/rfc791
Practice questions
What kind of access does a NAS provide to clients?
- File-level access
- Block-level access
- Raw radio access
- Packet inspection
Show answer
Answer: A. File-level access
A NAS shares files and folders over protocols such as SMB or NFS. Block-level access is the SAN approach.
Which are common uses of QoS?
- Prioritizing voice traffic over bulk downloads
- Limiting bandwidth for a low-priority traffic class
- Encrypting traffic across the internet
- Resolving hostnames to IP addresses
- Presenting block volumes to servers
Show answer
Answer: A. Prioritizing voice traffic over bulk downloads, B. Limiting bandwidth for a low-priority traffic class
QoS prioritizes sensitive traffic such as VoIP and can reserve or limit bandwidth per class. It does not encrypt data or map names to addresses.
True or false: each router that forwards an IPv4 packet increases its TTL value.
Show answer
Answer: False
False. Routers decrement the TTL, and a packet whose TTL reaches zero is discarded. This prevents packets from circling forever in a routing loop.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
