N10-009 ยท Security concepts and compliance
Network segmentation for IoT, OT, guest and BYOD
Segmentation for IoT/IIoT, SCADA/ICS/OT, guest and BYOD networks.
Key points
- Split the network into zones with controlled paths between them (VLANs, subnets, firewalls).
- IoT/IIoT devices are often unpatchable, SCADA/ICS/OT systems favor safety and uptime, guests and BYOD devices are untrusted.
- Give each its own segment and allow only the traffic it needs, so one compromise cannot reach everything.
Practice questions
Why are IoT devices usually placed in their own segment?
- To limit how far a compromised device can reach
- To increase their Wi-Fi speed
- To encrypt their traffic automatically
- To give them public IP addresses
Show answer
Answer: A. To limit how far a compromised device can reach
Many IoT devices cannot be patched or hardened, so isolating them limits the blast radius. Segmentation does not make them faster or encrypt their data.
Which practices fit segmenting a SCADA/OT network from the corporate network?
- Place a firewall between IT and OT
- Use a DMZ for data exchanged between the zones
- Put OT devices on the guest VLAN for convenience
- Allow only the specific protocols and hosts OT needs
- Permit any inbound remote access from the internet
Show answer
Answer: A. Place a firewall between IT and OT, B. Use a DMZ for data exchanged between the zones, D. Allow only the specific protocols and hosts OT needs
A firewall boundary with a DMZ and tightly allowed protocols keeps OT reachable only as needed. Flat sharing with guests and open inbound remote access defeat the purpose.
True or false: employees' personal BYOD phones are managed corporate assets and can safely share the staff VLAN.
Show answer
Answer: False
False. BYOD devices are not under full corporate control, so they usually get a separate segment with restricted access.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
