N10-009 ยท Wireless and physical installation
Racks, IDF/MDF and cabling
IDF and MDF, rack size, port-side exhaust/intake, patch panels, fiber enclosures, lockable racks.
Key points
- MDF: central room where outside connections such as the ISP circuit arrive.
- IDFs: closets serving a floor or area, linked back to the MDF.
- 19-inch racks: 1U = 1.75 in; a full cabinet is commonly 42U.
- Switch port-side intake or exhaust must match cold-aisle to hot-aisle airflow.
- Patch panels terminate permanent runs, so only short patch cords change.
- Fiber enclosures protect fiber terminations; lockable racks stop unauthorised access.
Source: https://en.wikipedia.org/wiki/19-inch_rack
Practice questions
How tall is one rack unit (1U) in a standard 19-inch rack?
- 1.00 inch
- 1.75 inches
- 2.50 inches
- 3.00 inches
Show answer
Answer: B. 1.75 inches
One rack unit is 1.75 inches (44.45 mm); a 2U device is 3.5 inches tall.
Which statements about the MDF and IDF are correct?
- The MDF is where external connections such as the ISP circuit typically terminate
- IDFs connect back to the MDF over backbone cabling
- The IDF is the main entry point for the ISP
- An MDF must always be on the top floor
- IDFs replace the need for patch panels
Show answer
Answer: A. The MDF is where external connections such as the ISP circuit typically terminate, B. IDFs connect back to the MDF over backbone cabling
The MDF is where outside circuits terminate, and IDFs reach back to it with backbone cabling. An IDF is not the primary service-provider entry point, and the MDF has no fixed floor.
To move a user to a different switch port, you normally re-terminate the permanent horizontal cable at the patch panel.
Show answer
Answer: False
False. The permanent runs stay terminated on the panel; you just move the short patch cord to another switch port. That is the whole point of a patch panel.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
