Bitzu

N10-009 ยท Modern network architectures

VXLAN and data center interconnect

VXLAN as a layer 2 over layer 3 encapsulation and its use for data center interconnect.

Key points

  • VXLAN wraps a layer 2 Ethernet frame inside a UDP packet (default port 4789), so layer 2 segments can be stretched across a routed layer 3 network.
  • A 24-bit VNI identifies each segment (about 16 million, versus 4094 usable VLANs), and VTEPs start and end the tunnels.
  • For data center interconnect (DCI), VXLAN lets two sites share one logical L2 domain over an IP link, for example to move VMs between sites without readdressing.

Source: https://www.rfc-editor.org/rfc/rfc7348

Practice questions

Single choice

What does VXLAN encapsulate to carry traffic across a layer 3 network?

  1. Layer 2 Ethernet frames inside UDP packets
  2. Layer 3 IP packets inside TCP segments
  3. Layer 1 signals inside MPLS labels
  4. Layer 7 HTTP requests inside ICMP messages
Show answer

Answer: A. Layer 2 Ethernet frames inside UDP packets

VXLAN carries original Ethernet (layer 2) frames inside UDP/IP packets. It is not a VLAN tag replacement at layer 1, and it does not translate routes or IP addresses.

Select all that apply

Which statements about VXLAN are correct?

  1. The VNI is 24 bits, allowing about 16 million segments
  2. Tunnel endpoints are called VTEPs
  3. It requires all sites to share one physical switch fabric
  4. It reduces packet size by compressing the frame header
  5. It limits you to 4094 segments like VLAN IDs
Show answer

Answer: A. The VNI is 24 bits, allowing about 16 million segments, B. Tunnel endpoints are called VTEPs

VXLAN uses a 24-bit VNI (about 16 million segments) and UDP transport, which makes it more scalable than 12-bit VLAN IDs. It does not need a shared physical L2 domain, and it adds header overhead rather than removing it.

True or false

True or false: Because VXLAN runs over UDP/IP, the underlay between sites can be a routed layer 3 network.

Show answer

Answer: True

True. That is the main point of the overlay: the underlay only needs IP reachability between VTEPs, while the overlay carries layer 2 segments.

Practice 8 questions on this topic in Bitzu

Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

Download on the App StoreGet it on Google Play

More N10-009 topics in this module