CPSA ยท Network protocols and filtering
Network media a tester may meet
Copper, fibre, Ethernet speeds, legacy token ring and 802.11 as media a tester may meet.
Key points
- Twisted-pair copper carries 10BASE-T, 100BASE-T and 1000BASE-T Ethernet (about 100 m per segment).
- Fibre carries light, suits long runs and ignores electrical interference.
- Token ring (IEEE 802.5) is a legacy ring technology replaced by Ethernet.
- 802.11 is radio, so its traffic can be captured from nearby without touching any cable.
Practice questions
Which IEEE standard family defines wireless LANs (Wi-Fi)?
- 802.3
- 802.5
- 802.11
- 802.1Q
Show answer
Answer: C. 802.11
802.11 covers wireless LANs. 802.3 is Ethernet, 802.5 is token ring, and 802.1Q is VLAN tagging.
Which statements about network media are correct?
- Fibre is not affected by electrical interference
- 1000BASE-T runs over twisted-pair copper
- Token ring is a legacy technology largely replaced by Ethernet
- 10BASE-T runs at 100 Mbit/s
- 802.11 traffic can only be captured by tapping a cable
Show answer
Answer: A. Fibre is not affected by electrical interference, B. 1000BASE-T runs over twisted-pair copper, C. Token ring is a legacy technology largely replaced by Ethernet
Fibre uses light so electrical interference does not affect it, 1000BASE-T runs over twisted-pair copper, and token ring is a legacy technology. 10BASE-T is 10 Mbit/s, and 802.11 can be captured over the air.
True or false: because fibre carries light rather than electrical signals, traffic on it cannot be intercepted.
Show answer
Answer: False
False. Fibre resists electrical interference, but it can still be tapped with optical taps or spliced, and traffic can be mirrored at a switch port.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
