Bitzu

312-50 ยท Wireless network hacking

SSID vs BSSID

802.11 standards and frequencies, SSID/BSSID, authentication modes, antennas, WLAN architecture.

Key points

  • The SSID is the human-readable network name broadcast by an access point (e.g. "OfficeWiFi"); several APs can share the same SSID.
  • The BSSID is the unique MAC address of the radio interface serving that network, so two APs with the same SSID always have different BSSIDs.
  • Analysts pivot on the BSSID, not the SSID, when they need to isolate traffic from one specific physical radio.

Source: https://www.wi-fi.org/discover-wi-fi/wi-fi-certified-6

Practice questions

Single choice

Which IEEE 802.11 amendment first introduced support for the 6 GHz band (branded Wi-Fi 6E)?

  1. 802.11n
  2. 802.11ac
  3. 802.11ax
  4. 802.11g
Show answer

Answer: C. 802.11ax

802.11ax (Wi-Fi 6) was extended into the 6 GHz band, and devices certified for that band are marketed as Wi-Fi 6E. 802.11ac and 802.11n operate only in 5 GHz and/or 2.4 GHz; 802.11be (Wi-Fi 7) also uses 6 GHz but did not introduce it.

Select all that apply

Which of the following are legitimate 802.11 authentication/network modes a wireless auditor should recognize?

  1. Open System authentication
  2. Infrastructure mode (clients associate to an AP)
  3. Ad-hoc (IBSS) mode
  4. Monitor mode as an 802.11 authentication type
  5. Promiscuous handshake mode
Show answer

Answer: A. Open System authentication, B. Infrastructure mode (clients associate to an AP), C. Ad-hoc (IBSS) mode

Open System and Shared Key are the two original 802.11 authentication modes; infrastructure mode (client-to-AP) and ad-hoc/IBSS (peer-to-peer, no AP) are both valid WLAN architectures. "Monitor mode" is a packet-capture mode on an adapter, not an 802.11 authentication or network mode, and "promiscuous handshake" is not a real 802.11 term.

True or false

True or false: a directional (e.g. Yagi or panel) antenna radiates energy roughly equally in all directions, making it the best choice for covering a single room from a central ceiling mount.

Show answer

Answer: False

False. That description matches an omnidirectional antenna, which is suited to central, all-around coverage. A directional antenna concentrates energy into a narrow beam, which is better for long point-to-point links or for focusing a scan/attack toward one target, not for even room coverage.

Practice 8 questions on this topic in Bitzu

Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

Download on the App StoreGet it on Google Play

More 312-50 topics in this module