Bitzu

100-150 CCST ยท Network devices, routing and switching

Cabling from a network diagram

Choosing patch cables and ports from a diagram, small topologies with switches and routers, power connections and rack layout.

Key points

  • Each line in a diagram is one cable between two labelled ports.
  • For every line, pick the cable that fits both ends: a copper patch cable for RJ-45 ports, a fiber patch cable plus matching modules for SFP ports.
  • Console cables are for management, not for the data path.
  • Every device also needs its own power connection unless it is powered over PoE.
  • In a rack, label both ends and keep patch cables short and tidy.

Practice questions

Single choice

In a typical network diagram, what does a line drawn between two devices represent?

  1. A VLAN that spans both devices
  2. A single physical connection between two ports
  3. The IP subnet of both devices
  4. The power feed for both devices
Show answer

Answer: B. A single physical connection between two ports

A line is a link, in practice one cable between the two named ports. It is not a wireless zone, a VLAN, or an IP address.

Select all that apply

Which points belong in a correct power plan for a small rack?

  1. Each switch and router gets its own power cable to an outlet or power strip
  2. IP phones on PoE ports do not need a separate power adapter
  3. The console cable supplies power to the switch
  4. A second power source is useful for devices that must stay up
  5. A switch is always powered through its uplink cable
Show answer

Answer: A. Each switch and router gets its own power cable to an outlet or power strip, B. IP phones on PoE ports do not need a separate power adapter, D. A second power source is useful for devices that must stay up

Each switch and router needs its own power connection, and a PoE-powered phone or access point gets power from the switch port. A console cable does not power a switch, and a switch cannot run only from its uplink unless it is itself a PoE-powered device.

True or false

An IP phone powered through PoE still needs its own wall power adapter next to the desk.

Show answer

Answer: False

False. The point of PoE is that the switch port delivers power over the data cable, so the phone needs no separate adapter.

Practice 8 questions on this topic in Bitzu

Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

Download on the App StoreGet it on Google Play

More 100-150 CCST topics in this module