100-150 CCST ยท Network devices, routing and switching
VLANs
Purpose of VLANs, access ports versus trunk ports, VLAN IDs, and how VLANs separate broadcast domains.
Key points
- A VLAN splits one physical switch into separate logical networks, each its own broadcast domain, identified by a VLAN ID (1 is the default VLAN on a Cisco switch).
- An access port belongs to one VLAN and serves an end device.
- A trunk port carries several VLANs between switches or to a router, using 802.1Q tags to mark each frame.
- Traffic between VLANs needs routing.
Practice questions
What is the main effect of putting ports into different VLANs on one switch?
- It separates them into different broadcast domains
- It makes the ports faster
- It gives the ports PoE
- It merges their MAC address tables
Show answer
Answer: A. It separates them into different broadcast domains
Each VLAN is its own broadcast domain, so broadcasts do not cross between them. It does not change cable speed or add power.
Which statements about access and trunk ports are correct?
- An access port belongs to a single VLAN
- A trunk port can carry traffic for several VLANs
- 802.1Q tags identify the VLAN of frames on a trunk
- An access port carries all VLANs at once
- A trunk port is normally used for a single end-user PC
Show answer
Answer: A. An access port belongs to a single VLAN, B. A trunk port can carry traffic for several VLANs, C. 802.1Q tags identify the VLAN of frames on a trunk
An access port carries one VLAN for an end device, a trunk carries several VLANs, and 802.1Q tags identify the VLAN on a trunk. An access port does not carry all VLANs.
Two hosts plugged into the same switch are always in the same broadcast domain.
Show answer
Answer: False
False. If their ports are in different VLANs they are in different broadcast domains, even on the same hardware.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
