100-150 CCST ยท Media, wireless and endpoints
Copper cables and connectors
UTP and STP twisted pair, categories, straight-through versus crossover, coax, RJ-45 and RJ-11 connectors, maximum lengths and sources of interference.
Key points
- Twisted pair (UTP unshielded, STP shielded) ends in RJ-45 plugs for Ethernet; RJ-11 is the narrower telephone plug; coax has a central conductor with a shield.
- Ethernet over twisted pair is limited to 100 m per segment.
- Interference comes from EMI sources (motors, power cables) and crosstalk between pairs.
Source: https://en.wikipedia.org/wiki/Category_5_cable
Practice questions
What is the maximum length of a single twisted-pair Ethernet cable segment?
- 55 meters
- 100 meters
- 185 meters
- 500 meters
Show answer
Answer: B. 100 meters
The limit is 100 m (330 ft) per segment. Longer runs need a switch or repeater. 55 m is only the figure for some 10GBASE-T cases.
Which situations can cause interference or errors on a copper cable?
- Running the cable next to a large electric motor
- Bundling it in parallel with a mains power cable
- Laying a fiber patch cord in the same cable tray
- Untwisting the pairs too far when terminating the plug
- Using properly grounded shielded twisted pair
Show answer
Answer: A. Running the cable next to a large electric motor, B. Bundling it in parallel with a mains power cable, D. Untwisting the pairs too far when terminating the plug
Heavy motors and parallel power cables inject EMI, and untwisting pairs too far at a connector causes crosstalk. Fiber in the same tray carries light and does not interfere; shielded cable reduces interference.
A crossover cable is always required to connect a PC to a switch.
Show answer
Answer: False
False. A PC to a switch uses a straight-through cable. Crossovers were for like devices (switch to switch, PC to PC), and modern ports usually auto-detect the pairing anyway.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
