100-150 CCST ยท Media, wireless and endpoints
Fiber cables and connectors
Single-mode versus multimode fiber, LC, SC and ST connectors, and when fiber is chosen over copper.
Key points
- Fiber carries light through glass.
- Single-mode fiber suits long distances; multimode suits shorter runs inside a building or campus.
- Common connectors: LC (small latch, high-density, SFP modules), SC (push-pull), ST (bayonet twist).
- Choose fiber for long distance, high bandwidth or electrically noisy areas.
Source: https://en.wikipedia.org/wiki/Optical_fiber_connector
Practice questions
Which fiber connector locks in place with a bayonet-style twist?
- LC
- SC
- RJ-45
- ST
Show answer
Answer: D. ST
ST uses a bayonet lock similar to a BNC shell. SC is push-pull and LC uses a small latch.
Which are advantages of fiber over copper?
- Immunity to electromagnetic interference
- Longer runs without a repeater
- Cheaper and simpler field termination
- Plugs directly into any RJ-45 port
- Very high bandwidth potential
Show answer
Answer: A. Immunity to electromagnetic interference, B. Longer runs without a repeater, E. Very high bandwidth potential
Fiber is immune to EMI, spans longer distances and has very high bandwidth potential. It is generally harder, not easier, to terminate, and it does not plug into an RJ-45 jack.
The LC connector is physically larger than the SC connector, which is why SFP modules use SC.
Show answer
Answer: False
False. LC is the smaller connector (1.25 mm ferrule versus 2.5 mm for SC), which is why it fits high-density SFP modules.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
