100-150 CCST ยท Troubleshooting and device commands
Interface, route and neighbour show commands
show ip interface brief, show interface, show interface status, show ip route and show cdp neighbors, and reading up/down and administratively down states.
Key points
- show ip interface brief: one line per interface with IP address, status and protocol. show interface (or show interface status on a switch) gives detail and a per-port overview. show ip route lists how the device reaches networks. show cdp neighbors lists directly connected Cisco devices. 'administratively down' means someone shut the interface; 'down' usually means no link, such as a missing cable.
Practice questions
What does show ip interface brief display?
- The IP address and status of each interface
- The full routing table
- The list of CDP neighbours
- The MAC address table
Show answer
Answer: A. The IP address and status of each interface
It gives a compact line per interface with its IP address and up/down state. Routes, neighbours and MAC addresses come from other commands.
Which details does show cdp neighbors list for each neighbour?
- The neighbour's device ID
- The local interface the neighbour is attached to
- The neighbour's password
- The neighbour's port ID
- The neighbour's full routing table
Show answer
Answer: A. The neighbour's device ID, B. The local interface the neighbour is attached to, D. The neighbour's port ID
It shows the neighbour's device ID, your local interface and the neighbour's port ID (plus platform and capability). It never lists the neighbour's passwords or routing table.
The state 'administratively down' means the cable has been unplugged.
Show answer
Answer: False
False. It means the interface was deliberately shut down in configuration. An unplugged cable usually shows plain 'down'.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
