100-150 CCST ยท Troubleshooting and device commands
Ping and traceroute
Using ping and tracert/traceroute, reading replies, timeouts and hop lists, and how firewalls can change the results.
Key points
- ping sends ICMP echo requests and shows replies and round-trip times; no reply shows as a timeout. tracert (Windows) or traceroute (Linux/macOS) sends packets with increasing TTL so each router on the path reveals itself; a hop that does not answer appears as asterisks.
- Firewalls may drop ICMP, so a failed ping or a silent hop does not prove the host or router is down.
Source: https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/tracert
Practice questions
Which protocol does the ping command use to test reachability?
- ICMP
- DNS
- DHCP
- HTTP
Show answer
Answer: A. ICMP
ping sends ICMP echo request messages and waits for echo replies. TCP and DNS are not used by ping itself.
Which statements about reading tracert output are true?
- Each numbered line is a hop on the path
- A line of asterisks always means the destination is offline
- Asterisks mean no reply arrived within the timeout
- tracert works by sending packets with increasing TTL values
- tracert only shows the destination, never the routers
Show answer
Answer: A. Each numbered line is a hop on the path, C. Asterisks mean no reply arrived within the timeout, D. tracert works by sending packets with increasing TTL values
Each hop is a router that returned a time-exceeded message and asterisks mean no answer within the timeout, often because of filtering. They do not automatically mean the destination is down.
If ping to a host fails, the host is definitely offline.
Show answer
Answer: False
False. A firewall or host setting may block ICMP echo while the host still works for other services.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

More 100-150 CCST topics in this module
- Troubleshooting methodology
- Help desk, ticketing and documentation
- Packet capture with Wireshark
- ipconfig, ifconfig, ip and nslookup
- Remote access and device management
- Cisco IOS command line basics
- show run, show version and show inventory
- Interface, route and neighbour show commands
- show mac address-table