N10-009 ยท IP addressing
IPv4 to IPv6 coexistence
Tunneling, dual stack and NAT64.
Key points
- Dual stack: hosts and devices run IPv4 and IPv6 at the same time and use whichever the destination supports.
- Tunneling: IPv6 packets are encapsulated inside IPv4 packets to cross an IPv4-only network (for example 6in4, Teredo).
- NAT64: a translator lets IPv6-only clients reach IPv4-only servers, embedding the IPv4 address in an IPv6 prefix such as 64:ff9b::/96; usually paired with DNS64.
Practice questions
What does dual stack mean?
- A host runs IPv4 and IPv6 simultaneously
- IPv6 packets are wrapped inside IPv4 packets
- IPv6 addresses are translated to IPv4 by a gateway
- A host has two NICs bonded for redundancy
Show answer
Answer: A. A host runs IPv4 and IPv6 simultaneously
Dual stack runs both protocol versions side by side on the same device. Tunneling and translation are different techniques, and disabling IPv4 would be IPv6-only.
Which of these tunneling mechanisms carry IPv6 traffic inside IPv4?
- 6in4
- 802.1Q trunking
- Teredo
- DHCP snooping
- 6to4
Show answer
Answer: A. 6in4, C. Teredo, E. 6to4
6in4, 6to4 and Teredo all encapsulate IPv6 in IPv4. 802.1Q is VLAN tagging on Ethernet and DHCP snooping is a switch security feature; neither is a transition tunnel.
True or false: on a dual-stack host, enabling IPv6 requires turning IPv4 off.
Show answer
Answer: False
False. Dual stack means both protocols are enabled together; the host picks the one the destination supports.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
