Bitzu

N10-009 ยท Routing

Static vs dynamic routing

When to use static or dynamic routes, default routes, and distance-vector vs link-state vs path-vector.

Key points

  • Static routes are typed in by an admin and never adapt to failures; they suit stub sites and backups.
  • Dynamic protocols learn and update routes automatically.
  • Distance-vector protocols share routes with neighbors, link-state protocols give every router a full topology map, path-vector protocols (BGP) carry a list of autonomous systems.
  • A default route (0.0.0.0/0) is the last-resort match.

Source: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/15986-admin-distance.html

Practice questions

Single choice

A link on the path fails. Which kind of route will NOT reroute traffic on its own?

  1. A route learned through OSPF
  2. A route learned through BGP
  3. A manually configured static route
  4. A route learned through EIGRP
Show answer

Answer: C. A manually configured static route

A static route stays in the table until an admin (or a tracking feature) changes it. Dynamic protocols detect the loss and recalculate.

Select all that apply

Which statements describe link-state routing protocols?

  1. Each router builds a full map of the topology
  2. Each router runs a shortest-path calculation on that map
  3. Routers only pass their own routing table to neighbors
  4. OSPF is an example of this type
  5. Routes carry a list of autonomous systems to stop loops
Show answer

Answer: A. Each router builds a full map of the topology, B. Each router runs a shortest-path calculation on that map, D. OSPF is an example of this type

Link-state routers flood topology information and each runs SPF on an identical database; OSPF is the standard example. Sharing only a routing table with neighbors is distance-vector, and carrying AS lists is path-vector (BGP).

True or false

True or false: because a default route 0.0.0.0/0 matches every address, it takes priority over more specific routes.

Show answer

Answer: False

False. Its /0 prefix is the least specific, so it is used only when no longer prefix matches.

Practice 8 questions on this topic in Bitzu

Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

Download on the App StoreGet it on Google Play

More N10-009 topics in this module