N10-009 ยท Troubleshooting services and performance
Performance issues
Congestion, bottlenecks, bandwidth vs throughput, latency, packet loss, jitter.
Key points
- Bandwidth: link capacity. Throughput: the rate you actually get, lower due to overhead, loss, congestion.
- Latency: packet delay. Jitter: variation in delay, hurts voice and video most.
- Packet loss: TCP retransmissions, gaps in real-time media.
- Congestion: queue delay and output drops near capacity.
- Bottleneck: slowest hop (such as an oversubscribed uplink).
- Fixes: QoS, a bigger link, removing the bottleneck.
Practice questions
Which metric describes the variation in packet delay over time?
- Jitter
- Throughput
- Bandwidth
- Attenuation
Show answer
Answer: A. Jitter
Jitter is delay variation. Latency is the delay itself, throughput is the achieved rate, and bandwidth is the capacity.
Which observations indicate congestion on an interface?
- Output drops rising during busy hours
- Latency that climbs at peak and recovers off-peak
- Utilisation sitting near 100 percent at peak
- CRC errors growing at a steady rate day and night
- Clients with 169.254.x.x addresses
Show answer
Answer: A. Output drops rising during busy hours, B. Latency that climbs at peak and recovers off-peak, C. Utilisation sitting near 100 percent at peak
Output drops, queue-driven latency at peak and near-100 percent utilisation are classic congestion signs. Steadily growing CRC errors point to a physical fault, and APIPA addresses to DHCP.
A 1 Gbps link will always deliver 1 Gbps of throughput to a single transfer.
Show answer
Answer: False
False. 1 Gbps is the bandwidth (capacity). Protocol overhead, latency, loss, congestion and slower hops mean the throughput achieved is lower.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
