N10-009 ยท Troubleshooting services and performance
Wireless issues
Interference, channel overlap, signal loss, insufficient coverage, client disassociation, incorrect roaming configuration.
Key points
- Interference: neighbouring Wi-Fi, microwave ovens, Bluetooth, cordless phones; worst in 2.4 GHz.
- Overlap: nearby APs on partly overlapping channels; in 2.4 GHz use 1, 6 and 11 (US).
- Co-channel interference: neighbours on one channel.
- Signal loss, poor coverage: distance, walls, low power; use a site survey or Wi-Fi analyzer.
- Disassociation: weak signal, mismatched settings. Roaming needs cell overlap, same SSID and security.
Practice questions
Which set of 2.4 GHz channels is non-overlapping in the US?
- 1, 6 and 11
- 1, 2 and 3
- 3, 5 and 7
- 2, 4 and 6
Show answer
Answer: A. 1, 6 and 11
Channels 1, 6 and 11 are spaced far enough apart not to overlap. Adjacent numbers such as 1, 2, 3 overlap heavily.
Which conditions can cause clients to disassociate or roam badly?
- Signal falling below the client's usable level
- A coverage gap between two APs
- APs of one network using different security settings
- A short DNS record TTL
- A renamed VLAN label on the core switch
Show answer
Answer: A. Signal falling below the client's usable level, B. A coverage gap between two APs, C. APs of one network using different security settings
A signal below the client's usable level, a coverage gap and inconsistent SSID or security settings between APs all break associations or handoffs. DNS TTL and VLAN names on the wired side do not drop a radio link.
Raising every AP's transmit power to maximum always improves a dense Wi-Fi network.
Show answer
Answer: False
False. High power increases co-channel interference and makes APs louder than client devices can answer, so clients stay on distant APs and performance often drops.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
