312-50 ยท Denial-of-service
What is a SYN flood?
UDP, ICMP and ping flood, Smurf, SYN flood, fragmentation, Ping of Death, DNS and NTP amplification, reflection.
Key points
- A SYN flood is a protocol attack that abuses the TCP three-way handshake.
- The attacker sends many TCP SYN packets, often with spoofed source addresses, but never completes the handshake with the final ACK.
- The server allocates state for each half-open connection in its backlog; once the backlog fills, legitimate new connections are rejected.
Source: https://www.rfc-editor.org/rfc/rfc4987
Practice questions
What makes a Smurf attack work against a target network?
- A misconfigured network forwards broadcast ICMP replies to a spoofed victim address
- The victim's DNS resolver cache is poisoned with a fake A record
- The victim's TLS certificate is replaced with a self-signed one
- The victim's web server is tricked into executing a SQL command
Show answer
Answer: A. A misconfigured network forwards broadcast ICMP replies to a spoofed victim address
A Smurf attack abuses a network that forwards traffic sent to its broadcast address; the attacker sends ICMP echo requests with the victim's spoofed source address to that broadcast address, so every host on the network replies, and all the replies flood the victim.
Which of the following are reflection/amplification attack vectors with documented amplification factors?
- DNS amplification via open resolvers
- NTP amplification via the monlist command
- SYN flood against a TCP backlog
- Ping of Death using malformed ICMP packets
- TCP port scanning for open services
Show answer
Answer: A. DNS amplification via open resolvers, B. NTP amplification via the monlist command
DNS amplification (up to roughly 179x) and NTP monlist amplification (roughly 556.9x) are both documented reflection/amplification techniques that abuse spoofed-source requests to open servers. A SYN flood and a Ping of Death do not rely on response amplification, and port scanning is reconnaissance, not a flood technique.
A SYN flood requires the attacker to complete the full TCP three-way handshake with the target for every connection it opens.
Show answer
Answer: False
False. The whole point of a SYN flood is that the attacker sends SYN packets and deliberately never sends the final ACK, leaving connections half-open so the server's backlog fills with state that is never completed.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
