CC ยท Network security fundamentals
IPv4, IPv6, private ranges and NAT
Address formats, private ranges, subnets at concept level, NAT and key IPv6 differences.
Key points
- IPv4 uses 32-bit dotted addresses (192.168.1.10); IPv6 uses 128-bit hex addresses (2001:db8::1).
- Private IPv4 ranges: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16, which are not routed on the internet.
- NAT lets many private hosts share public addresses.
- A subnet mask or prefix (/24) splits an address into network and host parts.
- IPv6 has far more space, no broadcast, and routers do not fragment packets.
Source: https://www.rfc-editor.org/rfc/rfc1918
Practice questions
Which of these is a private IPv4 address?
- 10.20.30.40
- 172.32.0.10
- 192.169.1.5
- 11.0.0.1
Show answer
Answer: A. 10.20.30.40
10.0.0.0/8 is one of the three private blocks. 172.32.x.x lies just outside 172.16.0.0/12, and 192.169.x.x and 11.x.x.x are public.
Which statements about IPv6 are correct?
- Addresses are 128 bits long
- Addresses are written in hex separated by colons
- It has no broadcast; multicast replaces it
- Addresses are 32 bits long
- It requires NAT because of address shortage
Show answer
Answer: A. Addresses are 128 bits long, B. Addresses are written in hex separated by colons, C. It has no broadcast; multicast replaces it
IPv6 addresses are 128 bits, written in hexadecimal with colons, and it has no broadcast (multicast is used). 32-bit addresses describe IPv4, and IPv6 is designed so NAT is not needed for address scarcity.
NAT is a security control that makes a firewall unnecessary.
Show answer
Answer: False
False. NAT incidentally hides internal addresses but does not inspect or filter traffic, and it offers no protection against malware or allowed connections. A firewall is still needed.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
