CC ยท Network security fundamentals
Network devices and what they do
Routers, switches, hubs, access points, proxies and what each does and protects.
Key points
- Hub (Layer 1): repeats every signal to all ports, so anyone can sniff.
- Switch (Layer 2): learns MAC addresses, forwards frames only to the right port; supports VLANs and port security.
- Router (Layer 3): connects networks, forwards packets by IP address, often with ACLs and NAT.
- Access point: lets wireless clients join the wired network.
- Proxy: sits between clients and servers; filters, caches and logs requests.
Practice questions
Which device forwards frames only to the port where the destination MAC address was learned?
- Hub
- Router
- Access point
- Switch
Show answer
Answer: D. Switch
A switch builds a MAC address table. A hub copies traffic to every port, a router works with IP addresses between networks, and an access point bridges wireless clients.
Which of the following are typical functions of a router?
- Connect different networks
- Forward packets by IP address
- Apply ACLs or NAT
- Repeat every signal to all ports
- Build a MAC address table as its main job
Show answer
Answer: A. Connect different networks, B. Forward packets by IP address, C. Apply ACLs or NAT
Routers connect different networks, forward by IP address and commonly apply ACLs or NAT. Repeating to all ports is a hub and learning MAC-to-port mappings is a switch.
A hub sends traffic only to the intended recipient.
Show answer
Answer: False
False. A hub repeats incoming signals out of every other port, which is why it is easy to eavesdrop on. Switches forward selectively.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
