JN0-106 ยท Networking fundamentals
Collision and broadcast domains
What collision and broadcast domains are, how hubs, switches and routers affect them, and the functions of a router versus a switch.
Key points
- Collision domain: devices whose frames can collide on a shared medium.
- A hub puts all ports in one collision domain; a switch gives each port its own.
- Broadcast domain: every device that receives a Layer 2 broadcast.
- A router interface stops broadcasts.
- A switch forwards by MAC address, a router by IP address.
Practice questions
Which device places all of its ports in a single collision domain?
- Hub
- Layer 2 switch
- Router
- Layer 3 switch
Show answer
Answer: A. Hub
A hub repeats every signal out of all ports, so all attached devices share one collision domain. A switch isolates each port and a router also separates them.
Which statements about a Layer 2 switch with no VLANs are true?
- Each port is its own collision domain
- It learns MAC addresses from source fields of frames
- It floods broadcasts out all other ports
- It stops broadcasts from crossing between ports
- It forwards frames by destination IP address
Show answer
Answer: A. Each port is its own collision domain, B. It learns MAC addresses from source fields of frames, C. It floods broadcasts out all other ports
A switch isolates collision domains per port, learns source MACs and floods broadcasts. It does not split the broadcast domain; that needs a router or VLANs.
True or false: a Layer 2 switch puts every connected host in its own broadcast domain.
Show answer
Answer: False
False. A switch separates collision domains per port, but all ports (in the same VLAN) share one broadcast domain.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
