JN0-106 ยท Networking fundamentals
Ethernet, MAC addresses and ARP
Ethernet frames, MAC addresses, CSMA/CD basics, and ARP address resolution.
Key points
- An Ethernet frame carries a destination MAC, a source MAC, a type field, the payload and an FCS.
- A MAC address is 48 bits, written as six hex bytes; the first 24 bits identify the manufacturer.
- CSMA/CD lets half-duplex stations detect collisions and retry.
- ARP maps a known IPv4 address to a MAC address on the local network using a broadcast request and a unicast reply.
Practice questions
How many bits long is an Ethernet MAC address?
- 32
- 48
- 64
- 128
Show answer
Answer: B. 48
A MAC address is 48 bits (six bytes). 32 bits is IPv4 and 128 bits is IPv6.
Which fields are part of an Ethernet frame?
- Destination MAC address
- Source MAC address
- Frame check sequence
- Time to live
- TCP source port
Show answer
Answer: A. Destination MAC address, B. Source MAC address, C. Frame check sequence
Destination MAC, source MAC and the FCS are Ethernet fields. TTL, source IP and TCP ports belong to higher-layer headers.
True or false: an ARP reply is broadcast to every host on the LAN.
Show answer
Answer: False
False. The request is broadcast, but the reply is sent unicast to the requester.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
