JN0-106 ยท Routing fundamentals
Dynamic routing protocols
Advantages and use cases of dynamic routing versus static, IGP versus EGP, and conceptual differences of RIP, OSPF, IS-IS and BGP.
Key points
- Dynamic protocols: discover neighbors, exchange reachability, adapt to topology changes automatically; scale better than static routes.
- Interior gateway protocols (IGPs): run inside one autonomous system.
- RIP: distance-vector, counts hops.
- OSPF and IS-IS: link-state, build a map of the topology.
- BGP: exterior gateway protocol (EGP) between autonomous systems, driven by path attributes and policy.
Practice questions
Which of these protocols is an exterior gateway protocol?
- BGP
- OSPF
- IS-IS
- RIP
Show answer
Answer: A. BGP
BGP exchanges routes between autonomous systems. OSPF, IS-IS and RIP are interior gateway protocols.
Which statements about dynamic routing protocols are correct?
- OSPF and IS-IS are link-state protocols
- RIP uses hop count as its metric
- BGP is used between autonomous systems
- RIP is a link-state protocol
- BGP is an interior gateway protocol
Show answer
Answer: A. OSPF and IS-IS are link-state protocols, B. RIP uses hop count as its metric, C. BGP is used between autonomous systems
OSPF and IS-IS are link-state, RIP is distance-vector using hop count, and BGP is the protocol used between autonomous systems. RIP is not link-state, and BGP is not an interior protocol.
Static routes automatically adapt to a link failure by selecting another path, just like dynamic routing protocols.
Show answer
Answer: False
False. A static route has no neighbor exchange and does not learn about failures elsewhere; an operator must configure backups or change it. Dynamic protocols recompute paths on their own.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
