JN0-106 ยท Routing fundamentals
Static routing
Configuring static routes with next-hop, discard and reject, default routes, qualified next hops and floating static routes, and verifying them.
Key points
- Static routes: under [edit routing-options static]: set routing-options static route 10.0.0.0/8 next-hop 192.0.2.1.
- Besides next-hop: discard (drop silently) or reject (drop and signal the sender).
- Default route: route 0.0.0.0/0.
- Default preference: 5; qualified-next-hop gives one next hop its own preference or metric (floating static backup).
- Verify: show route, show route forwarding-table.
Practice questions
Which static route action drops matching packets without sending ICMP unreachable messages?
- discard
- reject
- next-hop
- no-readvertise
Show answer
Answer: A. discard
discard silently drops the traffic. A next-hop forwards it, and reject drops it while notifying the sender.
Which statements about static routes in Junos are correct?
- discard drops matching packets silently
- A static route needs a protocol neighbor to become active
- A qualified next hop can have its own preference
- The static default preference is 100
- A default route is configured with the destination 0.0.0.0/0
Show answer
Answer: A. discard drops matching packets silently, C. A qualified next hop can have its own preference, E. A default route is configured with the destination 0.0.0.0/0
discard drops silently, a qualified next hop can carry its own preference, and a default route uses 0.0.0.0/0. Static routes do not depend on a protocol neighbor.
A floating static route is configured with a lower preference value than the primary route, so that it wins when both are present.
Show answer
Answer: False
False. A floating static route has a higher preference value than the primary, so it stays inactive until the primary route disappears.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
