JN0-106 ยท The Junos CLI and configuration model
J-Web basics
What J-Web is, enabling HTTP/HTTPS management access, and its core functions for monitoring and configuration.
Key points
- J-Web is the browser-based graphical interface for Junos devices, reached over HTTP or HTTPS, so no client software is needed.
- Access is enabled under the system services web-management hierarchy, and HTTPS is the encrypted choice.
- Core functions are monitoring status, configuring the device, troubleshooting with tools such as ping and traceroute, and maintenance tasks.
- Availability and layout vary by platform and release.
Source: https://juniper.net/documentation/en_US/junos13.2/topics/concept/J-web-overview.html
Practice questions
What is J-Web?
- A browser-based graphical interface for managing a Junos device
- A desktop application that must be installed on the admin PC
- A routing protocol for exchanging web traffic
- A serial console cable standard
Show answer
Answer: A. A browser-based graphical interface for managing a Junos device
J-Web is a web GUI used from a browser. It is not a desktop client, a hardware console or a routing protocol.
Which tasks can be done from J-Web?
- Viewing interface and routing table status
- Editing the device configuration graphically
- Running ping and traceroute
- Physically replacing a failed Routing Engine
- Flashing line card ASIC firmware
Show answer
Answer: A. Viewing interface and routing table status, B. Editing the device configuration graphically, C. Running ping and traceroute
J-Web covers monitoring, configuration editing and troubleshooting tools such as ping. It does not replace hardware or flash ASIC firmware.
To use J-Web you must install a dedicated client application on your computer.
Show answer
Answer: False
False. J-Web runs in an ordinary web browser over HTTP or HTTPS.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
