N10-009 ยท Switching
802.1Q trunking, native and voice VLANs
802.1Q tagging, trunk ports, native VLAN, voice VLAN.
Key points
- A trunk carries several VLANs over one link by inserting an IEEE 802.1Q tag (4 bytes with the VLAN ID) into each frame.
- Frames of the native VLAN (VLAN 1 by default) cross the trunk untagged, so both ends must agree on it.
- A voice VLAN lets an IP phone use its own VLAN for voice while a PC behind it stays in the access VLAN.
Practice questions
Which standard defines VLAN tagging on Ethernet trunks?
- IEEE 802.1Q
- IEEE 802.1X
- IEEE 802.1D
- IEEE 802.3af
Show answer
Answer: A. IEEE 802.1Q
IEEE 802.1Q adds the VLAN tag. 802.1X is port authentication, 802.1D is classic spanning tree, 802.3af is PoE.
Which statements about an 802.1Q trunk are true?
- It carries traffic for multiple VLANs over one link
- Non-native VLAN frames carry an 802.1Q tag
- Native VLAN frames are sent without a tag by default
- It encrypts the VLAN traffic it carries
- It needs a separate cable for each VLAN
Show answer
Answer: A. It carries traffic for multiple VLANs over one link, B. Non-native VLAN frames carry an 802.1Q tag, C. Native VLAN frames are sent without a tag by default
A trunk multiplexes VLANs on one link, tagging them, with the native VLAN left untagged. It does not encrypt, and tagging does not require one cable per VLAN.
By default, native VLAN traffic is tagged with 802.1Q when it crosses a trunk.
Show answer
Answer: False
False. The native VLAN is the one carried untagged, which is why mismatched native VLANs cause leaks.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
