Bitzu

N10-009 ยท Switching

Spanning tree and MTU

Loop prevention with STP/RSTP, root bridge election, port roles, MTU and jumbo frames.

Key points

  • STP and RSTP (802.1w) keep redundant Layer 2 links from creating loops by blocking some ports.
  • The switch with the lowest bridge ID (priority, default 32768, then MAC) becomes the root bridge.
  • Port roles are root, designated, alternate and backup.
  • MTU is the largest payload per frame: 1500 bytes by default, with jumbo frames (often about 9000) only working if every device on the path allows them.

Source: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-9/configuration_guide/lyr2/b_179_lyr2_9300_cg/configuring_spanning_tree_protocol.html

Practice questions

Single choice

How is the spanning tree root bridge chosen?

  1. The switch with the lowest bridge ID
  2. The switch with the highest MAC address
  3. The switch with the most active ports
  4. The first switch that was powered on
Show answer

Answer: A. The switch with the lowest bridge ID

The lowest bridge ID wins; priority is compared first, then the MAC address as tie-breaker. Highest MAC or most ports play no role.

Select all that apply

Which of these are spanning tree port roles?

  1. Root
  2. Designated
  3. Alternate
  4. Listening
  5. Native
Show answer

Answer: A. Root, B. Designated, C. Alternate

Root, designated and alternate are roles. Listening is a port state, and trunk or native describe VLAN behaviour, not STP roles.

True or false

A Layer 2 loop is harmless because Ethernet frames have a TTL that makes them expire.

Show answer

Answer: False

False. Ethernet frames have no TTL, so broadcasts circulate forever and multiply, causing a broadcast storm. STP exists to prevent this.

Practice 8 questions on this topic in Bitzu

Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.

Download on the App StoreGet it on Google Play

More N10-009 topics in this module