N10-009 ยท Switching
Link aggregation, speed and duplex
Link aggregation and LACP, speed and duplex settings and mismatches.
Key points
- Link aggregation (LACP, IEEE 802.1AX) bundles several physical links into one logical link for more capacity and redundancy.
- An LACP port set to active starts negotiation; passive only answers, so two passive ports never form a bundle.
- Speed and duplex must match on both ends of a link: a duplex mismatch causes late collisions, CRC errors and poor throughput.
Practice questions
Which protocol negotiates the formation of a standards-based link aggregation group?
- LACP
- STP
- LLDP
- DHCP
Show answer
Answer: A. LACP
LACP (802.1AX, formerly 802.3ad) negotiates bundles. STP prevents loops, LLDP advertises neighbours, DHCP assigns addresses.
Which statements about LACP are true?
- An active port initiates LACP negotiation
- Two passive ports cannot form a channel with each other
- The bundle appears as one logical link
- Members may freely mix 1 Gbps and 10 Gbps ports
- LACP requires spanning tree to be disabled
Show answer
Answer: A. An active port initiates LACP negotiation, B. Two passive ports cannot form a channel with each other, C. The bundle appears as one logical link
Active ports start negotiation and can pair with active or passive; two passives never form a channel; the result is one logical link. Member ports must be of the same type, so mixing speeds is not allowed.
If both ends of a link are set to LACP passive, they will still form a port channel.
Show answer
Answer: False
False. Passive ports only respond to LACP packets; with no active side nobody starts negotiation.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
