N10-009 ยท Routing
NAT and PAT
Static NAT, dynamic NAT, PAT/overload and what they do to addresses and ports.
Key points
- NAT rewrites IP addresses as packets cross a router.
- Static NAT is a permanent one-to-one mapping (good for servers reachable from outside).
- Dynamic NAT hands out addresses from a pool on demand, still one-to-one.
- PAT (overload) maps many inside hosts to one address and tells them apart by port numbers.
- NAT is not a firewall.
Source: https://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/13772-12.html
Practice questions
What lets many inside hosts share a single public address with PAT?
- Translating MAC addresses
- Using unique transport port numbers per session
- Giving each host a different VLAN
- Encrypting the traffic
Show answer
Answer: B. Using unique transport port numbers per session
PAT tracks each session by its port numbers, so return traffic maps back to the right host.
Which statements about PAT (overload) are true?
- Many inside hosts map to one outside address
- Source ports may be rewritten
- Each host needs its own public address
- The router keeps a translation entry per session
- It works only for ICMP
Show answer
Answer: A. Many inside hosts map to one outside address, B. Source ports may be rewritten, D. The router keeps a translation entry per session
PAT is many-to-one, rewrites ports when needed and keeps a translation table entry per session. It does not need a public address per host, which is its purpose.
True or false: because NAT hides inside addresses, it replaces the need for a firewall.
Show answer
Answer: False
False. NAT is address translation; it does not inspect or filter traffic by policy, and static mappings can even expose hosts.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
