JN0-106 ยท Interfaces and system services
Interface types, naming and logical units
Permanent versus transient interfaces, management and internal interfaces, the type-fpc/pic/port naming scheme, logical units and protocol families.
Key points
- Permanent interfaces: management (fxp0/em0) and internal links between the Routing Engine and the PFE.
- Transient interfaces: exist only when a PIC or port is present.
- Transient names: type-fpc/pic/port; ge-0/0/1 is Gigabit Ethernet port 1 on PIC 0 of FPC 0.
- Logical units: a physical interface carries one or more (ge-0/0/1.0).
- Each unit holds protocol families (inet, inet6) plus the addresses.
Practice questions
In the interface name ge-1/2/3, what does the middle number 2 identify?
- The FPC slot
- The PIC slot within the FPC
- The port on the PIC
- The logical unit
Show answer
Answer: B. The PIC slot within the FPC
The scheme is type-fpc/pic/port, so the middle number is the PIC. The first number is the FPC and the last is the port; the logical unit comes after a dot.
Which of these are valid names of transient (PIC-based) interfaces?
- xe-1/0/3
- lo0
- et-0/0/12
- ge-0/0/0
- fxp0
Show answer
Answer: A. xe-1/0/3, C. et-0/0/12, D. ge-0/0/0
ge, xe and et are Ethernet types that follow type-fpc/pic/port. fxp0 is a management interface and lo0 is the loopback; neither carries an FPC/PIC/port location.
True or false: the management interface fxp0 is a transient interface that forwards transit traffic.
Show answer
Answer: False
False. fxp0 (em0 on some platforms) is a permanent management interface for out-of-band access. It is not meant to route transit traffic between other ports.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
