JN0-106 ยท Initial configuration and access control
Remote management access
Enabling SSH, Telnet, NETCONF and root login restrictions under system services, and console versus remote access.
Key points
- Remote access is disabled by default; you enable each service under system services (ssh, telnet, ftp, netconf and others).
- SSH root login is controlled by root-login under system services ssh: deny-password (default, root only without password auth), allow, or deny.
- The console is a separate, local path used for first-time setup before remote access exists.
Practice questions
What is the default value of root-login under system services ssh?
- allow
- deny-password
- deny
- permit-key
Show answer
Answer: B. deny-password
The default is deny-password: root may log in over SSH only when the method does not use a password, such as a key. allow and deny must be set explicitly.
Which services can be enabled under system services for remote access?
- ssh
- bgp
- telnet
- ospf
- ftp
Show answer
Answer: A. ssh, C. telnet, E. ftp
ssh, telnet and ftp are statements under system services. BGP and OSPF are routing protocols configured elsewhere.
True or false: root-login deny-password blocks every root login over SSH.
Show answer
Answer: False
False. It blocks root only when the login method needs a password; root can still log in with a method such as a public key. Use deny to block root entirely.
Practice 8 questions on this topic in Bitzu
Short lessons, instant explanations and spaced review of what you get wrong. Free on iOS and Android.
